MX250 1 x USB (cellular failover1 )

[JED2021]

Is there any information  regarding the Cellular failover for the MX250 in case I lose both WAN 1 and WAN 2.

I undertsnad this is just a last gasp

[alemabrahao]

https://documentation.meraki.com/MX/Cellular/3G%2F%2F4G_Cellular_Failover_with_USB_Modems

[Inderdeep]

@JED2021 : I would also recommend you to check the below thread, apart from what @alemabrahao shared !

https://community.meraki.com/t5/Security-SD-WAN/Meraki-MX-USB-Modem-Compatibility/m-p/129985#M32442 

[PhilipDAth]

I don't think I would rely on cellular failover for something as "core" as an MX250.

I think what I would do is get an MX67C, plug your second Internet circuit into that, put in a SIM card for cellular failover, and then plug the LAN of the MX67C into WAN2 of the MX250.

[JED2021]

I have 2 WAN already.  I am looking for a way to at least get to the internet for slack and support.

We sent everyone home for the day  but had to walk around to notify people so a last gasp would have been helpful