Is it possible to point client VPN connections to WAN 2 in MX84?

[ShadowoftheD]

Hi,

Is it possible to direct remote access VPN connections to WAN2? 

can't seem to find it any on the settings for client vpn.

Thanks

[PhilipDAth]

It uses whatever you have configured as the primary uplink under "Secure & SD-WAN/SD-WAN & Traffic Shaping".

[ShadowoftheD]

thanks. but this also affects my site to site vpn connection as well right? like i.e. they'll have to peer with WAN2 now?

thanks

[Richard_W]

So as I discovered, yes, if as @PhilipDAth , mentioned you have primary uplink set to WAN2. Unfortunately it does not behave as AutoVPN does.