Meraki Community

GaryShainberg · ‎Sep 3 2020

Anyone found a way to allow all the inbound client VPN traffic to terminate on the WAN2 port of an MX.

I am sure you used to be able to do this but can not find the option.

And I being thick or has this been removed?

TIA

CTO & Solutioneer
CMNA, CMNO, ECMS2
SNSA, SNSP
~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

Jerome_EVAGroup · ‎Sep 3 2020

Hi @GaryShainberg

I think you will need to set WAN2 as primary link to do so.

View solution in original post

Jerome_EVAGroup · ‎Sep 3 2020

Hi @GaryShainberg

I think you will need to set WAN2 as primary link to do so.

ww · ‎Sep 3 2020

https://community.meraki.com/t5/Security-SD-WAN/Client-VPN-Using-WAN-2-Secondary/m-p/19086

Meraki Community

Client VPN using WAN2

Client VPN using WAN2