How i can create native vlan in Particular SSID

[Mohit_Dhanjal]

Hi Team,

Can you confirm me, how i can create native vlan for one SSID i have created.

Like Native Vlan:- Vlan 25

Access Vlan:- 30

Regards

Mohit Dhanjal

[ww]

When you have a switch trunk port.  For example : native vlan 1 , tagged: allow all

And you connect a AP at that trunk port.

Then you can select a tagged vlan in the ssid settings. Then this ssid will use that vlan.

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging_on_MR_Access_Points

I case you would have set the ssid to use the native vlan it would use vlan 1

[alemabrahao]

Just remember that normally the native VLAN on a trunk port is used to manage the APs.