Re: Site-to-site VPN connectivity

CMIT-Dub · ‎10-04-2021

I've configured site-to-site VPN between two MX64Ws but must have missed something. My Site-B is configured as 'Spoke' selecting Site-A as the hub. Site-A is set to 'Hub'. VPN status is green between devices. Both IP ranges are different, one 10.10.... and the other 192.168.... Utilizing Windows 10, I map from computer/Site-B to shared info on computer/Site-A it will not connect. What am I missing? It has to something simple.

DarrenOC · ‎10-05-2021

Hi @CMIT-Dub , have you specified what subnets you want to participate in the vpn?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

DarrenOC · ‎10-05-2021

Go to Security SD-WAN > Configure > Site to site VPN > Local Networks. You should see you local subnets there. Select which ones you want to participate in the vpn

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

CMIT-Dub · ‎10-05-2021

Those are/were set. Shouldn't I be able to ping the remote site subnet?