the trap contents = Not So good...

Getting noticed

the trap contents = Not So good...

Ok -

We configured the system to convert the : delimited MAC sent in the trap to "." delimited and do a lookup against all device to find the trap Target ...

[ Why was IP or Name not included in the trap ?  ]


Now we see the trap for portDisconnected / Connected using a MAC that is NOT a ifPhysical Address in the Box ? 

The Mac sent does show up in the Dot1 Bridge table ?


What is wrong this using the MAC that is sent in the DeviceGoesDown trap ?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.