Enabling Netflow for Meraki devices

hmc25000
Getting noticed

Enabling Netflow for Meraki devices

The Meraki dashboard logs are very limited and doe snot allow us to get a very granular view of our traffic flows. Because of this we're thinking about enabling netflow in the Meraki dashboard. We would like to enable this for the security MX, switches and Wireless AP's. We use site 24x7 for monitoring. Could there be any adverse affects when we enable netflow in the MEraki dashboard? IS there anything we need to be aware of?

 

Thanks.

 

2 Replies 2
alemabrahao
Kind of a big deal
Kind of a big deal

Have you checked this?

https://documentation.meraki.com/MX/Monitoring_and_Reporting/NetFlow_Overview

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
ww
Kind of a big deal
Kind of a big deal

Only mx (and ms390) support netflow.  You will get a minor increase of data load on your network (0.5%)

Get notified when there are additional replies to this discussion.