Our current network consists of 6 locations (HQ, DC, B1, B2, B3, B4).   All 6 locations have a Connection to our MPLS network. 3 of the locations (HQ,B1,B2) also have an Internet Connection for Non-MPLS traffic and a Meraki MX80 device that uses static routes to point MPLS traffic through the MPLS router/gateway (all other traffic goes through internet connection).   We are in the process of adding a small 7th location. I am hoping to avoid adding an MPLS connection to this new location and using an MX80 to route MPLS traffic through HQ via Site-to-Site VPN. Can't figure out how to configure the MX80 to make this happen. Example Scenario: New Location (B5) subnet is 172.24.1.0/24 MX IP 172.24.1.1  HQ subnet is 172.16.0.0/23 MX IP 172.16.0.1 MPLS Gateway 172.16.1.5 DC subnet is 172.16.10.0/24 MPLS Gateway 172.16.10.5 Static Route setup on HQ MX to always route traffic to DC through 172.16.1.5 (MPLS). Want all traffic from B5(172.24.1.0/24) destined for DC(172.16.10.0/24) to also route through HQ MPLS Gateway (172.16.1.5).   Thanks ... View more