Meraki Community

ChrisH93 · ‎Aug 8 2022

Hey Jim, Thanks for linking those KBs. Unfortunately I've already gone through those and they don't provide a solution for my issue. As an update: I've gotten the two MR76s to hook up to the MR86 by forcing the RF channel to a specific channel only avaliable to those three devices. it seems that the APs drop the connect for a couple seconds every minute trying to search for a gateway.

ChrisH93 · ‎Aug 8 2022

What do you mean by "Point to Multipoints"? I'm connecting two MR76s to a single MR86. Do you mean mesh? I guess in Meraki term, yes. The issue I'm running into is that I need these three APs to ONLY connect to each other. More specifically, I need the MR76s to ONLY connect to the MR86. There are other APs in the area that the 76s are connecting too.

ChrisH93 · ‎Aug 6 2022

Currently in the process for trying to setup a point to multipoint bridge. I'm using a single MR86 with a single MR-ANT-25 dual-band directional antenna on 5Ghz for the LAN link and two MR76s with the same MR-ANT-25 antenna on each non connected building. I have a SSID (named Bridge) setup in bridge mode and tagged to only these three specific APs. Have a RF profile setup for 5Ghz only and radio settings of: Channel width: Auto Channels used by AutoChannel: 144 only (Manually set). dBm: 10-21 Min Bitrate: 36-54. The issue I'm having is the APs are refusing to connect to each other and instead are connecting to other APs in the area. The other APs in the environment are configured to not even be broadcasting Channel 144 for 5Ghz. Has anyone successfully been able to do a point to multipoint link with the MR series APs?

Meraki Community

About ChrisH93

ChrisH93

Community Record

Badges

Re: Point-to-Multipoint Setup issues

Re: Point-to-Multipoint Setup issues

Point-to-Multipoint Setup issues