Hi   We need to add layer 3 switch (MS-250 Meraki)  to perform intervlan we have SAS 5506 That connect to vpn (Anyconnect) in vlan 1 ip 192.168.1.1 all connection go from this vlan 1 to the server,workstation,printer,vpn...... we need to divide our network to  intervlan 20,30 and keep vlan 1 manage our server and printer Vlan 1 for server and printer 192.168.1.0/24(because we can not change server and printer  ips) intervlan for workstation 192.168.20.0/24 intervlan for wifi 192.168.30.0/24 we alredy create the intervlan interface in the switch and the scope in dhcp server  Name    Subnet  IP interface VLAN id  DHCP Settings Mangement vlan  192.168.1.0/24 192.168.1.3 1 off workstation vlan 192.168.20.0/24 192.168.20.3 20 20 Relay to dhcp server wifi vlan 192.168.30.0/24 192.168.30.3 30 30 Relay to dhcp server     Dhcp server 2016 : 192.168.1.10 we create scope using the switch's routing interface for each VLAN as the gateway 192.168.1.1 for scope 1 192.168.20.3 for scope 20 192.168.30.3.for scope 30   topologie     Problem: we start move same workstation to vlan 20 for test Device in vlan 20 Take adress in vlan 20 , DHCP work fine , but  no internet to this device  I can not ping any address from vlan 1 when i'm using  vlan 20 or 30 to , but ping work fine between vlan 20 and 30   Questions:   how to have traffic between my Layer 3 intervlans .Vlan 20 , vlan 30 and vlan 1(native vlan) until now my pings are succesfull between vlan 20 and 30 but unseccesful when trying to ping vlan 1(native vlan that have all my servers) from vlan 20 and 30     Thank you   Please Advice      ... View more