Hi    I have previously had my MX64 appliance running as a single lan with a radius SSID broadcasting.   The radius client is setup within NPS as 192.168.106.1.   I have since created 4 VLANS to seperate the network as per below.   192.168.106.0/25 192.168.*.1 - 126 Default Vlan 1 192.168.106.128/27 192.168.*.129-158 Staff Only 2 192.168.106.160/27 192.168.*.161-190 Pupil Only 3 192.168.106.192/28 192.168.*193-206 Admin 4   Since adding these VLANS I noticed that clients could no longer connect to the RADIUS ssid. Upon looking at the logs I could see that the requests were coming into NPS and failing as the MX IP of VLAN 4 was not setup as a client within NPS.   If I add this radius works fine on client pc’s   My problem is my radius SSID is set to use VLAN 1 why does the the radius request come from the VLAN 4 MX IP?    Is it by design that the highest VLAN makes radius requests?   Any advice guidence why this is happening so I can understand will be much appreciated, if you need any further information from me please ask   Thanks   Scott ... View more