Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Running IDSM-2 4.1.1S47(S42). IDSMC 1.2. Trying to apply signature S49 with IDSMC. IDSMC reports show update complete but after several hours "sh ver" on IDSM reports signature S42.Any help is appreciated.
A bit lengthy to describe here. You have to have IOS. To configure have a look at:http://www.cisco.com/en/US/partner/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
CB21AG and PI21AG support CCKM. It is enabled automatically when you configure LEAP. If you are using XP you need to disable the 802.1x supplicant and the MS WCM.
c,With a dedicated WDS (no client associations) the suggested max is 60. This will scale higher in future releases. You are correct that you can have only one active WDS at the time.Note that the limit is not hard coded - you might be able to sueak i...
