Meraki

DarrenOC · ‎Jul 27 2023

H @KarstenI , I’ve used fs quite a few times. Cheap and cheerful and does the job. Although unsupported 🫣

DarrenOC · ‎Jul 27 2023

Hi All, I've reviewed the Meraki SFP datasheet and confirmed they don't manufacture a 10Gig copper sfp: SFP and Stacking Accessories - Cisco Meraki A project we're working on requires a number of 10Gig copper uplinks for some point-to-point links. Luckily the switch's we're using have mgig ports so we're able to utilize these. But, for one site we've had to upgrade from an MS355-24 to the 24X2 just to take into consideration this additional 10gig port which is an expensive option. Has anyone used a Cisco SFP-10G-T-X in a Meraki switch or another vendors SFP? And yes I'm aware that "Meraki won't support this" but if they don't provide a suitable part what choice does the market have?

DarrenOC · ‎Jul 26 2023

Hi @Crocker - what version of firmware are you running? Sounds like a bug to me. Have you trawled through your other SD-WAN & Traffic shaping settings to ensure you have nothing erroneous configured? I would assume you have your Primary uplink set as WAN1. For giggles have you tried flicking WAN failover and fallback from Graceful to Immediate? As you've correctly stated absolutely no traffic should be touching WAN2 until the Primary link fails.

DarrenOC · ‎Jul 26 2023

Good luck in your new job @kYutobi @and welcome back

DarrenOC · ‎Jul 26 2023

Agree with @BlakeRichardson , the Meraki side is as simple as it gets so you’re reliant whom ever is configuring the Forti to get their part right.

DarrenOC · ‎Jul 26 2023

Hi @ArteckMX , you shouldn’t have to use IKE1 as it’s the least secure option available. I’ve integrated Meraki VPN with Forti before so it’s most certainly possible but I do remember the remote partner struggling with their Config.

DarrenOC · ‎Jul 25 2023

hi @errolngrant - not much you can do here with regards DHCP snooping except block rogue DHCP servers off the network: MS DHCP Servers - Cisco Meraki

DarrenOC · ‎Jul 25 2023

You've probably done this already but in the interim could you not create a S2S VPN between sites B and C using Meraki AutoVPN? This way Site A can reach both sites. What subnets are at Sites B and C? Where is the error being generated, on the Palo?

DarrenOC · ‎Jul 25 2023

are you able to ping in both directions from the pbx to the meraki and vice versa? are the phones on the same subnet as the pbx? can you ping from the phone subnet out and back?

DarrenOC · ‎Jul 25 2023

@Hector_Hdez you have a routing problem.

DarrenOC · ‎Jul 25 2023

ah....the magic of the cloud. say no more...

DarrenOC · ‎Jul 25 2023

I could see that being helpful especially for larger estates across multiple floors/buildings etc. you could select the colour code of the AP dependent on the map maybe?

DarrenOC · ‎Jul 25 2023

@KarstenI , imagine the server requirement’s to fulfill that across the Meraki estate. 😁

DarrenOC · ‎Jul 25 2023

Hi @Electronic20 , please reach out to Meraki support. You can find the contact details within your dashboard

DarrenOC · ‎Jul 24 2023

Assume you’ve read this https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/SSID_Tunneling_and_Layer_3_Roaming_-_VPN_Concentration_Configuration_Guide

DarrenOC · ‎Jul 24 2023

Hi @SJB1 , I’ve used the wifi concentrator mode seamlessly numerous times

DarrenOC · ‎Jul 24 2023

Hi @CameronS , doesn’t look like this progressed very far. You still stuck? What are your next steps?

DarrenOC · ‎Jul 24 2023

Welcome @Churchil_Oduor . Lovely bunch here

DarrenOC · ‎Jul 24 2023

Welcome @sxm5157

DarrenOC · ‎Jul 22 2023

Hi @NickHvy , please email me at doconnor@resalire.co.uk with the charity details and address and I’ll sort this out.

DarrenOC · ‎Jul 22 2023

Hi @NickHvy , where are you based? If UK I have a PoE switch you can have.

DarrenOC · ‎Jul 21 2023

HI @Dunky - Somebody within Meraki will have this information. @GreenMan - sorry to pick on you but you're the first name that popped into my head. Are you able to source this info or inquiry internally?

DarrenOC · ‎Jul 20 2023

@UKDanJones - I’m pretty sure you can explain the 802.11v and k piece.

DarrenOC · ‎Jul 20 2023

Hi @LakesideLion You can find the error=30 code here: https://support.google.com/chrome/a/answer/7172038?hl=en#zippy=%2Cassociation-status-codes

DarrenOC · ‎Jul 20 2023

Love the username 😁

About DarrenOC

DarrenOC

Darren O'Connor

Community Record

Badges