Meraki

RaphaelL · ‎Aug 8 2022

Currently testing it. I'm on a 3 weeks vacation so I will have to follow up that issue when I come back. Will keep this thread updated

RaphaelL · ‎Aug 4 2022

Well done to everyone !

RaphaelL · ‎Aug 4 2022

We currently only have iphones and ipads. I will have to try to set it to adaptive.

RaphaelL · ‎Aug 4 2022

Hi ! Have you tried messing with 802.11r ? Enabled , Adaptive ?

RaphaelL · ‎Aug 3 2022

Hi , This is the correct endpoint for outbound firewall rules on a MX : https://developer.cisco.com/meraki/api-v1/#!get-network-appliance-firewall-l-3-firewall-rules getNetworkApplianceFirewallL3FirewallRules It would have been easier to state 'outbound' somewhere on that documentation

RaphaelL · ‎Jul 28 2022

Hi , I'm 99% sure that this feature is not available via API. It would be a great addition to the API ! Clicking the 'Give your feedback' box on the bottom right of your dashboard page and do the suggestion ! It helps !

RaphaelL · ‎Jul 26 2022

That is pretty much all the syslog events that are sent by Meraki devices. Not sure to understand your question. The detail is already in the documentation that you linked

RaphaelL · ‎Jul 26 2022

Hi , Those are the IEEE 802.11 codes . They can be found on google or that link : https://community.cisco.com/t5/wireless-mobility-knowledge-base/802-11-association-status-802-11-deauth-reason-codes/ta-p/3148055

RaphaelL · ‎Jul 25 2022

Yes that would be the way to do it ! Somehow I missed the part about the Group Policy in your post.

RaphaelL · ‎Jul 25 2022

Hi , Simply do : Deny 192.168.1.0/24 RFC1918 ( 10.0.0.0/8 , 192.168.0.0/16 , 172.16.0.0/12 ) Any Permit 192.168.1.0/24 Any Any This will block anything from 192.168.1.0/24 towards rfc1918 , except it's own vlan and will allow the flows towards the internet.

RaphaelL · ‎Jul 22 2022

Woot Woot ! Thanks a lot guys ! 😀

RaphaelL · ‎Jul 19 2022

The call is indeed : dashboard.organizations.getOrganizationClientsBandwidthUsageHistory(orgID) if you do a print(meraki.__version__) ( in python3.X ) Are you running the latest version ( 1.22.1 ) ? You might be on a older package version ! You can update / upgrade the package version with : pip install meraki --upgrade Edit : just tried the endpoint with the package and confirmed that it is working for my Org.

RaphaelL · ‎Jul 18 2022

Still no luck with 28.6 nor 28.6.1 ( the code is identical to 28.6 ) Going to test 29.1 soon..

RaphaelL · ‎Jul 18 2022

Hi , This is probably the feature you are refering to : https://documentation.meraki.com/MR/Encryption_and_Authentication/IPSK_Authentication_without_RADIUS

RaphaelL · ‎Jul 15 2022

Not sure to understand your question but A Port 49 <--> C Port 49 B Port 49 <--> D Port 49 will work since A,B are on the same stack and C,D on the same stack. vPC is only needed when the hardware is not stacked or configured in a VSS mode. If your goal is to plug a device into stack A,B and stack C,D and try to bundle the links , that won't work :

RaphaelL · ‎Jul 13 2022

Should be an easy fix ! Syslog shows : dport=51514 but the rule states 51414...

RaphaelL · ‎Jul 13 2022

Hi , I'm currently testing this feature. 1- Let's say I have 300 networks with a network tag 'Packet_capture_enabled' , when going to organization > administrators , and selecting the Tag 'Packet_capture_enabled' I can't select the Port management Privileges. I can only select the privilege IF I manually add the 300 networks to the administrator Privilege. 2- Upon looking at the OpenApiSpec , I don't see any endpoints to configure Port Management Privileges ( since they are Network-Wide ). We have over 1500 networks, this might be hard to do without APIs. Thanks ,

RaphaelL · ‎Jul 12 2022

At that point ( 200 MX ) I would try to use templates if possible

RaphaelL · ‎Jul 12 2022

Good point. It doesnt. My eyes skipped the MX part of the OP

RaphaelL · ‎Jul 12 2022

Hi , I have not , but it is simple enough if you have a minimum of knowledge of the Meraki API and Python ( or any scripting language ) You would have to use atleast this endpoint : https://developer.cisco.com/meraki/api-v1/#!update-network-wireless-ssid to update the SSID. The logic could be like that : 1- Loop through all networks 2- Get the Wireless SSIDs numbers 3- Get the Wireless SSID configuration of the desired SSID 4- Update with the correct SSID configuration of the desired SSID Voilà ! Obviously you want to test your script before running it , unless you plan on explaining why the Wifi is no longer working 🙂 EDIT: Only for MR. Not working for MX. There are no endpoints available to my knowledge.

RaphaelL · ‎Jul 11 2022

Hi , Can you paste a screenshot of Organization -> Licence info ( blur all licences and sensible info ) Thanks ,

RaphaelL · ‎Jul 8 2022

Yes , you are probably missing the pagination : perPageInteger The number of entries per page returned. Acceptable range is 3 - 100. Default is 10. You could either do this call : /networks/{networkId}/networkHealth/channelUtilization?perPage=100 or manage the pagination via your code.

RaphaelL · ‎Jul 7 2022

Thanks a lot for the reply 🙂 This should only work on MS right ? If the network is combined and contains a MX , we won't be able to capture let's say S2S trafic or anything on the MX ? ( Not that a big deal breaker )

RaphaelL · ‎Jul 6 2022

Can this 'privilege' be assigned to a SAML administrator roles ? That would be ideal ! And by the way, thanks for the quick and detailed replies ! love it

RaphaelL · ‎Jul 6 2022

We are a big company splitted in multiple teams. So our network teams manage , configure and monitor our Meraki environnement , but some teams would like to be able to do packet captures but the network team do not want "random" people being Org admins Our real world example : SOC would like to have the rights to do packet captures in cases of forensic investigation but the NOC doesn't allow people from SOC to be Org admins / Net admins. At the moment the SOC has to contact the NOC for every packet capture that they want to do. Thanks 🙂

About RaphaelL

RaphaelL

Raphael Letourneau

Community Record

Badges