Static ip configured through local status page, but in dashboard after adding AP device is diff IP

[Mohit_Dhanjal]

Hi All,

I have configured static IP in my meraki MR-46 through local status page, but after adding device in meraki dashboard, I can check that LAN IP(Static) is different, as of now device is not communicating with dashboard. Will it affect communication also.

Regards

Mohit Dhanjal

[ww]

When the ap connect the dashboard it will take all the config that you set on the dashboard. 

 AP likes a ip address + gateway in the native vlan of the switchport. and it need to connect a working dns server.