Wireless Site Survey

Getting noticed

Wireless Site Survey

Just completed a wireless site survey using a MR36. Just wanted to post as I had to find the docs to do it but you can set the AP to Survey mode via its' on web page. Put the AP on a ladder with a PoE injector and moved it around and used Netspot to perform the survey.

We almost had to use a generator because there was not much power available at the site (new buildings).


Anyway just wanted to post if someone else needs to do this - worked great! 

Here to help

Re: Wireless Site Survey

Great tip!  I've done something similar with a home-made battery back-pack.  It wasn't Meraki, but if you know how many volts and amps you need DC, it can be done.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.