LAN out to public wifi gateway

SOLVED
BChimp0
Here to help

LAN out to public wifi gateway

Hi there,

Thanks for reading.

 

I'm wondering if it's possible to place one of the physical switchports on our MX64 into the public wifi space.  In my perfect world, the client would be handled by Meraki NAT DHCP with its traffic going out through the wifi public gateway IP.

 

Thanks again!

Bob

1 ACCEPTED SOLUTION

Accepted Solutions
Network-dad
A model citizen

Re: LAN out to public wifi gateway

If you are using the Meraki NAT on the Wireless you can not... You would have to use one of the other addressing and Traffic methods that allowed vlan tagging and tag it to a guest vlan and have that vlan on your firewall assigned to your "Public" port.

2020-06-09 09_19_41-Window.png2020-06-09 09_22_48-Window.png

Dakota Snow | Network-dad Linkdedin
CMNO | A+ | ECMS2
Check out IT Career Skills onIt Career SkillsIt Career Skills

View solution in original post

1 REPLY 1
Network-dad
A model citizen

Re: LAN out to public wifi gateway

If you are using the Meraki NAT on the Wireless you can not... You would have to use one of the other addressing and Traffic methods that allowed vlan tagging and tag it to a guest vlan and have that vlan on your firewall assigned to your "Public" port.

2020-06-09 09_19_41-Window.png2020-06-09 09_22_48-Window.png

Dakota Snow | Network-dad Linkdedin
CMNO | A+ | ECMS2
Check out IT Career Skills onIt Career SkillsIt Career Skills

View solution in original post

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.