cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

some computer can not see networks

SOLVED
Highlighted
Conversationalist

some computer can not see networks

Hi team,

 

I have a net with MX,MS and MR. The SSIDs working good  but few computers don't see the SSIDs created, it can see the orthers net close to the building but not the ones I created.
Example: One computer have the problem is a I7 generation 8, It no the problmen Min. Bitrate in RF Profiles. 
The weird thing is only few computers can't see the SSIDs and the other don't have problem.

what would be the problem?

Thanks and Goodnight.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: some computer can not see networks

How are your SSIDs configured:

  • Wireless > Access Control: Band selection
  • Wireless > Access Control: Minimum bitrate
  • Wireless > Radio Settings: Are you using RF Profiles for any of your access points

 

What kind of wireless adapter is in the client? E.g. Intel(R) Dual Band Wireless-AC 8260

https://www.thewindowsclub.com/how-to-find-out-which-wireless-card-is-present-in-your-laptop

View solution in original post

4 REPLIES 4
Highlighted
Getting noticed

Re: some computer can not see networks

Upgrade wireless adapter driver on those computers also make sure you have no sticky mack enable on that port Meraki is connected to it.

Highlighted
Kind of a big deal

Re: some computer can not see networks

How are your SSIDs configured:

  • Wireless > Access Control: Band selection
  • Wireless > Access Control: Minimum bitrate
  • Wireless > Radio Settings: Are you using RF Profiles for any of your access points

 

What kind of wireless adapter is in the client? E.g. Intel(R) Dual Band Wireless-AC 8260

https://www.thewindowsclub.com/how-to-find-out-which-wireless-card-is-present-in-your-laptop

View solution in original post

Highlighted
Conversationalist

Re: some computer can not see networks

Thanks, I checked but the problem continue. I upgrade wireless adapator, restart machine and working.

Thanks for your answer.

Highlighted
Conversationalist

Re: some computer can not see networks

Thanks, I upgraded wireless adapator, restart machine and It working .I trusted of Machine Generation jejeje.

Have a good day
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.