channel utilization is particularly high,How to optimize the wireless network?

ericliu
Comes here often

channel utilization is particularly high,How to optimize the wireless network?


The AP used in wireless networks is mr52, but the utilization ratios of 2.4G and 5G channels are particularly high. Channels and power configurations are automatically configured using Meraki. Users report that the Internet connection is slow, but the wired network is normal. What are the tools? Or methods to optimize my wireless network? thanks

QQ图片20180516180825.png

4 Replies 4
ww
Kind of a big deal
Kind of a big deal

what dbm are the on? 

how many ap are in this network

how close are these ap together.

 

ericliu
Comes here often

There is a total of 10 aps in this office network,Ap distance of about 10 meters

ericliu
Comes here often

Ap power  is automatic,about 8dbm to 20dbm

BrandonS
Kind of a big deal

In general terms you probably need to move MR's closer to your users and adjust the power down a bit and maybe add more MR's.  I would study the RF spectrum and review the Air Marshal page too.  I am guessing you have a lot of neighbor AP's and you may want to choose channels manually based on what you see in RF spectrum as the best possible.

 

 

- Ex community all-star (⌐⊙_⊙)
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels