can we mix MR42 and MR46 same floor

SOLVED
Antonj
Just browsing

can we mix MR42 and MR46 same floor

We have floor but one side of the floor has more users than other section, already have MR42 and want to replace  with MR46. will causes any issues 

1 ACCEPTED SOLUTION
GIdenJoe
Kind of a big deal
Kind of a big deal

You will cross the streams and cause a catastrophic explosion!!!!
j/k it will work but for most stability group likewise AP's together so you don't have a salt and pepper deployment.
Some clients might have issues if they constantly try to roam between AP's that have different information elements in their probe responses/beacons.

View solution in original post

4 REPLIES 4
Inderdeep
Kind of a big deal
Kind of a big deal

@Antonj : Check the feature sets, If they are same, yes you can mix that

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
cmr
Kind of a big deal
Kind of a big deal

@Antonj You can mix them, but be aware that the MR46 is a WiFi6 AP, whereas the MR42 is only WiFi5.  This means that WiFi6 devices might have issues roaming between the different models.  Therefore I would recommend that you create two zones with the border as small as possible.

Antonj
Just browsing

Thank you cmr,

GIdenJoe
Kind of a big deal
Kind of a big deal

You will cross the streams and cause a catastrophic explosion!!!!
j/k it will work but for most stability group likewise AP's together so you don't have a salt and pepper deployment.
Some clients might have issues if they constantly try to roam between AP's that have different information elements in their probe responses/beacons.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels