cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Wireless feature differences between MR33 and MX65W

Conversationalist

Wireless feature differences between MR33 and MX65W

Hello,

 

I've searched but can't seem to find a simple page showing the wireless capabilities differences/features between the MR33 AP and the MX65W  (wireless features only). 

Would anyone know all of the additional functionality/features (AirMarsal etc)  that a MR33 would have over the MX65W? 

 

 

Thanks in advance.

3 REPLIES 3
Kind of a big deal

Re: Wireless feature differences between MR33 and MX65W

I don't think the Wireless menu even shows up when you just have the MX-W models. So I think most features there will not be supported:

2019-02-07 12_19_56-Window.png

 

Check this link which shows what the wireless configuration looks like on an MX: https://documentation.meraki.com/MX/Wireless/Creating_a_Wireless_Guest_VLAN_on_a_Z-series_Teleworker...

Highlighted
Kind of a big deal

Re: Wireless feature differences between MR33 and MX65W

The built in APs have severly retarded functonality compared to the full APs.  Basically you can do PSK or WPA2-Enterprise mode, and that is about it.

I don't think there are any splash pages or any of the other advanced functionality.

Getting noticed

Re: Wireless feature differences between MR33 and MX65W

One major feature is the the builtin WiFi in MXs will not mesh of work as a "seamless" SSID with other MR in the same network, the SSID on the MX will appear as "separate" to the SSID of the MRs even though you may name them the same.

 

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Wireless_Mesh_Networking

 

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.