Wireless clients not getting dhcp

DorienM
New here

Wireless clients not getting dhcp

I have 3 MR33s connected through an unmanaged switch to a MX64. I have configured 3 SSIDs each with their own VLAN. I have set up a native vlan and allowed the native vlan as well as the ssid vlans on port 1. The APs each connect to the MX and pull their config but when a wireless client connects they are unable to get a DHCP address. Any help would be greatly appreciated, thanks.

3 REPLIES 3
PhilipDAth
Kind of a big deal
Kind of a big deal

Unmanaged switches don't support VLANs.

Good to know. So assuming there is no way to get around the unmanaged switches and separating traffic by SSID is a must is there another way I could do this? I saw in the meraki dashboard an option for "VPN: tunnel data to a concentrator" I know it is meant for remote sites but is there a way I may be able to make it work? If so how?

PhilipDAth
Kind of a big deal
Kind of a big deal

You can plug them directly into the MX64, and configure the VLANs on the ports there (probably just be trunk ports).

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels