Wireless Bridge between 2 buildings

SOLVED
KTsiveriotis
New here

Wireless Bridge between 2 buildings

Hello everybody,

we need to connect 2 buildings - 2 networks with a wifi bridge at gigabit speed.

The network uses vlan trunks, distance about 30 meters.

Can you suggest units?

Thank you,

1 ACCEPTED SOLUTION
Bruce
Kind of a big deal

A Meraki solution probably won’t meet your needs as it can’t hand off multiple VLANs from the remote access point, so you won’t be able to use trunks to it. Have a look at this document, https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Extending_the_LAN_with_a_Wireless... 


There’s a few other vendors out there who provide specific wireless bridge solutions, and I’d have a look at them.

View solution in original post

2 REPLIES 2
Bruce
Kind of a big deal

A Meraki solution probably won’t meet your needs as it can’t hand off multiple VLANs from the remote access point, so you won’t be able to use trunks to it. Have a look at this document, https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Extending_the_LAN_with_a_Wireless... 


There’s a few other vendors out there who provide specific wireless bridge solutions, and I’d have a look at them.

PhilipDAth
Kind of a big deal
Kind of a big deal

30 meters.  Is there no chance you can't run fire?  Perhaps a chain between the building roofs and run the fibre over that, along a fence, in a trench, etc?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels