WPA3 Transition mode

Kaibob
New here

WPA3 Transition mode

Hi there,

Thanks for reading!

What was your experience with moving from WPA2 to WPA3?  I'm reading that other admins had trouble with some clients with WPA3 only.  

 

Selecting Transition mode seems better/more secured than just using WPA2 for all clients.

 

How was the transition for your organization?

Thanks!

Bob

2 REPLIES 2
redsector
Head in the Cloud

 took the transition mode, so can clients which are not able for WPA3 use WPA2

WB
Getting noticed

Last I read about transition mode there had been issues using it due to poor client drivers? That may have cleared up with more recent releases but last year it seemed that way at least.

 

Likely you'll see a lot people leave Wi-Fi 5/6 SSIDs on WPA2 only and utilise WPA3 only on Wi-Fi 6E SSIDs as 6E capable clients have a mandatory WPA3 compatibility requirement

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.