Source IP and or VLAN mismatch - Guest network - Bonjoure

Banfield75
Getting noticed

Source IP and or VLAN mismatch - Guest network - Bonjoure

Hi

We have a problem with disconnecting of Wi-Fi on the guest network.
The error seems to have to do with DHCP and Bonjour.

 

Bonjour feature:
A printer connected to LAN interface belong to VLAN 50 with a static IP.
Guest on the bridged network want to print from the customers guest network.

 

Involved VLAN and configuration

  • 10 Wi-Fi “xxxx Public” 10.59.0.0/25,

     Wireless – Configuration - SSIDS
     Bridge mode, VLAN tagging. ID 10.
     Bonjoure forwarding = Service VLAN 50 Services Printers
     DHCP: Lease time 1 day.

 

  • 50 Printer-Bonjour 192.168.50.0/24. DHCP do not respond to DHCP request.

Event

When I check appliance event logs, I can see a lot “Source IP and or VLAN mismatch”.
Almost all the alarms involve clients connected to the Guest Wi-Fi VLAN 10.
The timing is every 30 minutes on different clients.

The user has already a IP address from Guest network 10.59.0.0.

Connection is loost and the alarm shows below.

 

The alarm shows “source client assigned vlan: 50”
Last illegal ip mapped vlan id: 10

 

Configuration of Bonjoure on Security & SD-WAN -> Configure -> Firewall ->Bonjoure forwarding

  • Service VLAN: Print-Bonjour
  • Client VLANs: VLAN10
  • Service: Printers

The printer connected to switch port belonging to VLAN 50 and a static IP from the same network.
I turned off DHCP on VLAN 50 before to see if the problem could have anything to do with it.


No luck.

3 REPLIES 3
Coesione_srl
Here to help

Hi @Banfield75 

Do you have a full-stack solution (ap-switch-firewall all meraki)?

 

Yes....MX 84 & MS210 & MR33

Hi @Banfield75 

Where is intervlan routing, in the switch or firewall?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels