I have a four AP MR42 conected fine , but today i had a cut on SSID , when i researched after on event log for access point i detected this :
|Single device packet flood||radio: 2, state: end, alarm_id: 20 « hide |
|Auto RF channel change||Channel changed to improve network performance « hide |
|Auto Tx power change||Tx power increased « hide |
I would like to know what is that mean ? and how to solve this problem ?
The first one is related to air Marshal: maybe the air marshal page itself give some additional info? https://documentation.meraki.com/MR/Monitoring_and_Reporting/Common_Wireless_Event_Log_Messages#Air_...
2 and 3 is meraki autorf doing its job to optimize you network.
thank you for your reply ,
the air marshal page itself give some additional info?
it show me this image , attached below.
that is mean a attack (rxternal or internal ) from the device type ?
If its one of your clients maybe the client is somewhere stuck on the authentication proces and keeps trying? If its a unknown client it could be some kind of attack.
But im just guessing here..