Setting up HP Envy for wireless printing

Solved
dmcritchley
Conversationalist

Setting up HP Envy for wireless printing

I have a small network of MR67 router connected to fibre broadband service; a MS120 8 port switch and some APs (2 x MR36 and 2 Ubiquiti ones).

 

I have an HP Envy printer connected to one of the APs which I would like to set up so anyone can wirelessly print from anywhere on the network. The device is visible from the Meraki Dashboard so is set up for wireless printing which you can only do if you directly connect to it vs through the network. What do I need to set up in the Meraki Dashboard to allow this wireless printing from anywhere?   fixed by changing from NAT to Bridge mode

 

Also in terms of general security set up what should I do on the MR67 and MS120 to protect them or is the AP security sufficient to prevent intrusion?

1 Accepted Solution
Inderdeep
Kind of a big deal
Kind of a big deal

Great, so it is fixed !

 

Regards
Inderdeep Singh

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

View solution in original post

1 Reply 1
Inderdeep
Kind of a big deal
Kind of a big deal

Great, so it is fixed !

 

Regards
Inderdeep Singh

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels