Hello Experts,
I brought a meraki from USA to India, which was working fine in USA.
When i connect the meraki to my home router it does not broadcast the ssid, when i connect via hotspot it works.
looks like my meraki is getting blocked by router settings.
is there any settings i need make on my local router.
When i tag a vlan id, ssid does not broadcast..
A couple things you might check. Since you relocated the device got to Network-wide->General and see if the Country/Region has changed or needs changed. Not sure what India's regulations would be. While you are on that page check to ensure the timezone is correct. Finally, go to Wireless->SSID availability, make sure the SSID you are looking for is in the drop down box at the time and see if there is a Scheduled availability on it.
You may need to factory reset the AP.
Is the status light orange? or green? or blue?
When orange, your accesspoint can´t reach the cloud config.
Thanks for the replies.
Meraki broad casts when connected to one internet provider and does not work on the other provider.
@redsector When its not working all the lights are green,
@Jwiley78 Tried the setting. did not help.
@Pavan84 have you checked this documentation. If that doesn't work you will need to call support.