Routing problems with MR wifi

SOLVED
amalogi
New here

Routing problems with MR wifi

Hi all,

 

I have set an SSID with tagged vlan that is working correctly, but when i want to reach other vlan on same nwtwork i'm reciving response from 10.128.128.128 the network is not reachable. So I think the AP don't have any route rule.

 

Thanks for your help

1 ACCEPTED SOLUTION
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @amalogi 

 

What do you have under Wireless > Configure > Firewall and Traffic shaping > Block IP's and Ports

 

Is your rule set to Allow or Deny

 

UCcert_0-1633455982050.png

 

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

2 REPLIES 2
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @amalogi 

 

What do you have under Wireless > Configure > Firewall and Traffic shaping > Block IP's and Ports

 

Is your rule set to Allow or Deny

 

UCcert_0-1633455982050.png

 

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Hi @DarrenOC ,

 

It was set to deny, many thanks for your help!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels