cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Reconfigured MR42 stuck on Orange to Green LED, does not reach Meraki Cloud

Highlighted
Here to help

Reconfigured MR42 stuck on Orange to Green LED, does not reach Meraki Cloud

I reconfigured a couple MX64s and MR42 for two new networks.  The MXs are online and seem to be working,  I have the MR42s plugged into port 4 with power adapters providing power (MX64 does not have POE).  The LED on the MR42s go from green to orange and back.  In the dashboard they say they have never connected to the Meraki Cloud and the SSIDs are not showing up.  What did I not do?  Thanks!

2 REPLIES 2
Highlighted
Here to help

Re: Reconfigured MR42 stuck on Orange to Green LED, does not reach Meraki Cloud

Well, I may have found it.  Port 4 on the MX was configured for Internet.  After fixing that I'm making some progress.   🙄

Highlighted
Kind of a big deal

Re: Reconfigured MR42 stuck on Orange to Green LED, does not reach Meraki Cloud

Sounds like you got it figured out

I was going to suggest trying another port, make sure its configured for access if its a simple single VLAN setup, otherwise make it a trunk port with proper vlans allows (SSID to VLAN etc.). I would recommend 25.13 firmware, i think that runs solid for MR42 from what I've seen.
Nolan Herring | nolanwifi.com
TwitterLinkedIn
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.