Rate Limit (5Mbps) appears in effect when AP's are set to unlimited (user / ssid)

NonSeq
New here

Rate Limit (5Mbps) appears in effect when AP's are set to unlimited (user / ssid)

Worked with consultant and confirmed no rate limits set on vlan hosting the route out for Guest WiFi. Speedtests will initially jump (Download) to 30 Mbps on start up then quickly come down and sit at 5Mbps. (Upload) Tests gradually climb to 5 Mbps and stay there.  Not sure where this is being set, but the AP's are set to unlimited.

4 REPLIES 4
kevinl
Getting noticed

Just curious, do you happen to have an MX upstream of the MRs? If you set a rate limit on the MX, that will apply to the MR clients as well, when accessing the Internet (not for local traffic). 

BlakeRichardson
Kind of a big deal
Kind of a big deal

Have you confirmed the speed using a wired connection?

MMoss
Building a reputation

If you have a MX look under traffic shaping

 

Global.JPG

MMoss
Building a reputation

If you have a MX look under traffic shaping. 

 

Global.JPG

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels