Options for active directory connection

SOLVED
Marsrock2021
Getting noticed

Options for active directory connection

We have been testing users using AD integration on WiFi for work devices but it's max is 24 hours.

This isn't much use having users log in each day. 

Any way around this or to increase the time. 

 

Also any way to stop users logging in to this on a device that's not in AD as well. 

 

Lastly the splash screen doesn't show successful log in. It does log in but you get no message to say that. Is this normal. 

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

Use WPA2-Enterprise instead of splash login.

https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_... 

 

If you only want AD members to connect then use certificate-based authentication.

https://documentation.meraki.com/MR/Encryption_and_Authentication/RADIUS%3A_WPA2-Enterprise_With_EAP... 

 

 

I'll warn you - this is quite a bit of work.  If you haven't done it before it will be worth paying someone to "come in" and set it up.

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

Use WPA2-Enterprise instead of splash login.

https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_... 

 

If you only want AD members to connect then use certificate-based authentication.

https://documentation.meraki.com/MR/Encryption_and_Authentication/RADIUS%3A_WPA2-Enterprise_With_EAP... 

 

 

I'll warn you - this is quite a bit of work.  If you haven't done it before it will be worth paying someone to "come in" and set it up.

Thanks for that. 

 

Had a radius setup before so must see about setting that up. 

 

The AD setup in meraki seems a bit pointless. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels