No MTs connecting after switching MR36 IoT radio back from ESL to BLE

TheOnlyZby
Here to help

No MTs connecting after switching MR36 IoT radio back from ESL to BLE

On my demo MR36, the IoT radio was configured to serve ESLs (SES imagotag), it worked fine. Then, I needed to demonstrate MT14s, so switched back the IoT radio to BLE mode (disabled ESL), but even after an upgrade to MR 28.6.1, a reset, none of my previously connected MTs are able to connect back on the MR36!

 

I have to say I had the exact same issue when I got the MTs ... and don't know exactly how we fixed it, due to the fact I did multiple up & downgrades, resets, power down&UP, etc.

 

Is this a known issue? Is there anything I can do more/better to troubleshoot this, please?

 

(I got a comment from the MT14 Beta program support, it seems the BLE process doesn't start correctly on the MR after this config change. This confirms what I experience) 

 

0 REPLIES 0
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.