Traffic to/from wired LAN ports was not being properly prioritized (MR30H)
MR would update its gateway MAC address mapping when interoperating with certain WIDS/WIPS systems that sent spoofed ARP requests to 3rd party devices (Wi-Fi 5 Wave 2 MRs/Wi-Fi 6 MRs)
LAN tab on MR status page stopped updating results for DNS queries (Wi-Fi 5 Wave 2 MRs/Wi-Fi 6 MRs)
The Ago(s) field for DHCP requests under the LAN tab on MR status page would reset back to 0 every 12 hours despite no new DHCP requests being seen (Wi-Fi 5 Wave 2 MRs/Wi-Fi 6 MRs)
MR got into a state where it would stop detecting BLE clients either until the MR was rebooted or the BLE Scanning functionality was toggled (MR42/MR52/MR53/MR84)
MR may reboot when changing the configured country for the network (Wi-Fi 6 MRs)
MR would not respond to 802.11 authentication frames if the client first sent an 802.11 Shared Key Authentication frame followed by an 802.11 Open Authentication frame for SSIDs configured with MAC-based access control (Wi-Fi 5 MRs)
MR does not stop blinking LEDs after the Blink LEDs live tool is enabled (MR42/MR42E/MR52/MR53/MR53E/MR84)
General stability improvements (Wi-Fi 5 Wave 2 MRs/Wi-Fi 6 MRs)
Known issues
Sporadic packet loss & instability on Layer 3 roaming & Teleworker VPN SSID's (Wi-Fi 5 Wave 2 MRs/Wi-Fi 6 MRs)
Client association status is not accurately reflected when viewing the Client Details page (Wi-Fi 6 MRs)
MR reboots every 15-20 minutes when connection to Meraki Dashboard is unavailable (Wi-Fi 6 MRs)
UNII-2e channels not available for indoor MRs in Israel IL regulatory domain (Wi-Fi 6 MRs)
