Meraki & Plex

Solved
Tal
Meraki Employee
Meraki Employee

Meraki & Plex

I have a Meraki MR56 connected to MX75. The MX75 is connected to my ISPs modem/switch.
On one of my servers I'm running Plex media server and a client, connected to the same SSID can't reach the server.
On the same ISP modem/switch I have a google mesh.
If the Plex Server and the Plex Client are connected to the SSID of the google mesh - everything is working.
Any idea how to resolve this on the Meraki?
Thanks

1 Accepted Solution
Tal
Meraki Employee
Meraki Employee

YES!!!
solve the problem.
Thanks

View solution in original post

4 Replies 4
RaphaelL
Kind of a big deal
Kind of a big deal

Just to make sure . When both the client and the server are on MR56 it's not working , but when using an other AP ( google mesh ) it's working ?

 

I would make sure that client to client traffic is set to allowed under the firewall page. See below

 

Reference : https://community.cisco.com/t5/wireless/meraki-cannot-ping-client-to-client/td-p/3878100

Tal
Meraki Employee
Meraki Employee

YES!!!
solve the problem.
Thanks

ww
Kind of a big deal
Kind of a big deal

Is your mr ssid in bridge mode?

You ssid has any fw rules?

 

Tal
Meraki Employee
Meraki Employee

yes. 

 Bridge mode: Make clients part of the LAN

no FW rules at all.

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels