Maximum SSID count

Solved
Luffy
Getting noticed

Maximum SSID count

Hi guy,

 

I have a question about maximum SSID in a Meraki AP.

One of my customers wants to set Meraki AP in a Hotel.

In this case, there are 30 floors in the Hotel.

 

Customer wants to set only a network, not many network in a Meraki organization.

I saw the SSID setting there was maximum 15 SSID in a Meraki MR.

Can I add more SSID or Should I divide more network in a Meraki organization ?

 

My customer wants to set SSID per floor.

In this case, it needs 30 SSID for my customer.

Is it possible ?

 

Thank you,

 

1 Accepted Solution
Tony_Ang
Getting noticed

The only way to do is to setup per floor as per network.

It's not a good practice but that's the only way.

As per network you can do 15 SSID so it should be fine.

 

But you can make a wish in the wish tab 🙂

 

Regards

Tony

View solution in original post

4 Replies 4
GuyWMD
Conversationalist

This is a horrible idea! 

What are they actually trying to achieve. Will this be just for guest internet access or a range of other 'behind the scenes' services. Corp networks, retail, F&B etc? 

 

It sounds like a LOT of misconceptions need to be addressed. 

 

Maximum as far as I know is 15, but ideally you don't want more than 3 active. More info on that here: https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Multi-SSID_Deployment_Considerati...

Luffy
Getting noticed

I think my customer will install 3 or 4 AP with floor tag and set just 1 SSID per a floor.

 

 

Adam
Kind of a big deal

What is the benefit of having SSID's per floor?  If they are near the end of a floor or are walking between floors the experience would be more seamless if the SSID's were all just 'X Guest' etc...

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Tony_Ang
Getting noticed

The only way to do is to setup per floor as per network.

It's not a good practice but that's the only way.

As per network you can do 15 SSID so it should be fine.

 

But you can make a wish in the wish tab 🙂

 

Regards

Tony

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels