(MX64W-HW) How do I access the functionality displayed in the below part of the attached image?

SOLVED
MicJameson
Here to help

(MX64W-HW) How do I access the functionality displayed in the below part of the attached image?

Hello.

(Please see attached screenshot.) device= MX64W-HW , IOS 16.16

 

I need to enable SSID broadcasting, yet when I navigate to "Wireless settings" I have very few options.

How do I access the functionality displayed in the below part of the attached image?

Thank you!

 

Meraki-1.PNG

1 ACCEPTED SOLUTION
Ryan_Miles
Meraki Employee
Meraki Employee

The second image is when you use standalone Meraki APs. That's different than the wireless settings & capabilities in the MX-W.

View solution in original post

2 REPLIES 2
Ryan_Miles
Meraki Employee
Meraki Employee

The second image is when you use standalone Meraki APs. That's different than the wireless settings & capabilities in the MX-W.

Brash
Kind of a big deal
Kind of a big deal

As @Ryan_Miles said, you're looking under "wireless" which is configuration for standalone AP's.

 

Configuration for the wireless functionality built into the MX device is under Security & SD-WAN/Teleworker Gateway > Configure > Wireless settings

 

https://documentation.meraki.com/MX/Wireless/MX_and_Z-Series_Wireless_Settings

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels