MR76 with MA-ANT-21

CraigAP
Comes here often

MR76 with MA-ANT-21

We have a couple of warehouse deployments with ceiling heights between 12M and 18M. Aisles are between 1.8M and 2.5M, with WiFi required at all heights. I'm proposing to do a survey with the MR76 and the MA-ANT-21 as the client only uses the 5GHz in the warehouse, so I will advise they disable the 2.4GHz radios on all APs. Should I be expecting any anomalies from the AP in this scenario or will it work fine?

1 REPLY 1
DimuthuS
Conversationalist

Use MR76 with MA-ANT-25. much better coverage pattern than MA-ANT-21 (if you want to roof mount).

If you want wall mount each warehouse aisle MA-ANT-25 is better, but you have to face the antennas on same direction.

If you use MA-ANT-20 you have to mount the AP vertically using down pole.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.