MR74

RaedAL
New here

MR74

can I use two only of the MR74 antenna port instead of four one 2.4GHz and one 5GHz?

 

1 REPLY 1
Inderdeep
Head in the Cloud

Re: MR74

@RaedAL : It depends. In some outdoor cases, with a 2x2:2 access point like the MR74 and MR76, they have band-specific antenna ports, two for 2.4GHz on the top of the AP and two 5GHz ports on the bottom of the AP, and they are labeled as such.  There may be certain designs or reasons to have one radio disabled.  In that case, for example if the 2.4GHz radio is disabled, then you would not have any antenna(s) connected to the 2.4GHz antenna ports.  And in that scenario, you should still have those ports properly covered

https://documentation.meraki.com/MR/Other_Topics/Frequently_Asked_Questions_regarding_Cisco_Meraki_A...

Regards
Inderdeep Singh
www.thenetworkdna.com
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.