MR to MX (thats in concentrator mode)

SOLVED
thomasthomsen
Building a reputation

MR to MX (thats in concentrator mode)

I cant seem to find this information.

 

I know that the AP creates a tunnel to the MX.

And I know that when the MX is in "NAT" mode, I can select the VLAN from the dropdown list.

But when the MX is in concentrator mode it just says :

 


(Enter a VLAN id, or leave blank)

 

If I enter lets say 100 here, will the contrator mode MX (thats only connected on the WAN port) tag packets from this SSID out with VLAN 100 on that WAN port ?

 

/Thomas

1 ACCEPTED SOLUTION
5 REPLIES 5
thomasthomsen
Building a reputation

Thanks, it was just not very clear from the Documentation I think.

Hmmm one more thing I cant find in the documentation.

Does a SSID tunnel to MX count as a site-to-site tunnel ? towards the maximum number of site-to-site tunnels a certain MX HW appliance can handle ?

ww
Kind of a big deal
Kind of a big deal

Yes

Bruce
Kind of a big deal

@thomasthomsen, I agree with you, the documentation on using the MX as a wireless concentrator isn’t great, but as @ww stated it’s ‘yes’ to both your questions.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.