MR hardware issue

hasnorMD
Here to help

MR hardware issue

Hey Folks,

 

One of our MR AP's in our office is dead due to a water leak from A/C. Is there any chance I can fix it? My vendor advised me to ask cisco as they might help me replace it. Anyone experienced the same thing?

 

Appreciate you inputs. TIA

 

Cheers!

7 Replies 7
CptnCrnch
Kind of a big deal
Kind of a big deal

What kind of MR is it? If it's not End of Life, you'd have lifelong warranty. It'd be replaced by opening a case with Meraki.

DarrenOC
Kind of a big deal
Kind of a big deal

As @CptnCrnch states if you have a license aka support then you should be ok to contact support and request a replacement.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
hasnorMD
Here to help

@CptnCrnch its MR33. I thought so. I've already opened a case to Meraki for RMA.

 

@DarrenOC Yes, it does have license.

 

Thanks!

cmr
Kind of a big deal
Kind of a big deal

@hasnorMD if Cisco refuse to replace it due to the water damage, you can open up the case and dry it out, we had an MR that filled with water and died, was emptied and dried a week or so later and it is fully functional again

Greenberet
Head in the Cloud

additionally what @cmr has said:
I would also clear it with destiled water to get rid of water rests and dirt. Normal water might result in some corrosion which would damage the AP additionally.

Adam2104
Building a reputation

Its unlikely that they'll replace it. Water damage from a water leak would typically fall on your insurance company to deal with.

hasnorMD
Here to help

Just an update guys, replacement is in process. I'll be waiting for the hardware to be shipped out.

 

A big point for MR over Aironet. 

 

thanks!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels