MR 76 feature point to point between building to building

Solved
Mike12
Conversationalist

MR 76 feature point to point between building to building

Hi,

 

I would like to check with community for the solution to extend the wifi coverage between building to building.

 

I saw there is a point to point feature for MR 76 in the MR data sheet. I would like to use this feature to cover the warehouse building from the main office building without extending the cables to warehouse.

 

Can someone explain it to me or share the setup for the point to point?

 

Thanks,

Mike

1 Accepted Solution
jbright
A model citizen

These document may be helpful too:

 

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Extending_the_LAN_with_a_Wireless...

 

https://documentation.meraki.com/MR/Deployment_Guides/Mesh_Deployment_Guide#Multi-VLAN_support_over_...

 

MR firmware 28.1 brings the ability to support multiple VLANs over a wireless mesh connection.

Take note that you must still contact support to turn this feature on for the specific network.

View solution in original post

2 Replies 2
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @Mike12 , believe you’re looking at Wireless Mesh Networking.  Info below

 

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Wireless_Mesh_Networking

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
jbright
A model citizen

These document may be helpful too:

 

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Extending_the_LAN_with_a_Wireless...

 

https://documentation.meraki.com/MR/Deployment_Guides/Mesh_Deployment_Guide#Multi-VLAN_support_over_...

 

MR firmware 28.1 brings the ability to support multiple VLANs over a wireless mesh connection.

Take note that you must still contact support to turn this feature on for the specific network.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels