MR 33!Disconnects sometimes and wont work till i reboot device

Solved
lakshi
Here to help

MR 33!Disconnects sometimes and wont work till i reboot device

Hello, i have a cisco meraki mr33 access point that was working fine till now. Now suddenly it disconnects sometimes and remains disconnects until i reboots the device...

Can anyone help me out...? Also, how to upgrade firmware?

Thanks

1 Accepted Solution
rwiesmann
A model citizen

Hey, 

here is the documentation how to manage firmware of meraki.

https://documentation.meraki.com/zGeneral_Administration/Firmware_Upgrades/Managing_Firmware_Upgrade...

 

and here the best practices for the MR's.

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

 

do the upgrade and check afterwards if you still have the disconnects.

 

hope this helps

roger

View solution in original post

1 Reply 1
rwiesmann
A model citizen

Hey, 

here is the documentation how to manage firmware of meraki.

https://documentation.meraki.com/zGeneral_Administration/Firmware_Upgrades/Managing_Firmware_Upgrade...

 

and here the best practices for the MR's.

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

 

do the upgrade and check afterwards if you still have the disconnects.

 

hope this helps

roger

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels