Low Data rates

SOLVED
GoncaloC
Here to help

Low Data rates

Hi all,

 

For some sites in my organization the dashboard is reporting for some clients low dates (around 7% or 8%)  with SNR of +40db and RSSI of -48dbm. To my understanding the SNR and RSSI values are good, thus i dont understand how can some clients have very low data rates. 

 

What would be the approach to troubleshoot this, what should i be looking for to identify what is causing low data rates?

 

TIA 

1 ACCEPTED SOLUTION
GIdenJoe
Kind of a big deal
Kind of a big deal

In most cases it is a non-issue.

The dashboard takes the client max datarate at max channel width.
Since most decent 5 GHz networks operate at 20 to 40 MHz then you already are at 25 to 50% datarate closest to the AP's.

I think the devs should change up this metric to account for the configured channel width of the network.

View solution in original post

1 REPLY 1
GIdenJoe
Kind of a big deal
Kind of a big deal

In most cases it is a non-issue.

The dashboard takes the client max datarate at max channel width.
Since most decent 5 GHz networks operate at 20 to 40 MHz then you already are at 25 to 50% datarate closest to the AP's.

I think the devs should change up this metric to account for the configured channel width of the network.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels