cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Leverage RF tool to tshoot/monitor interference

Highlighted
Meraki Employee

Leverage RF tool to tshoot/monitor interference

Probably you've seen this tab and clicked once or twice....

Under Wireless -> Access points -> select an AP -> click on RF this will display historical utilization over the channels in use.

This can be very helpful if you are having bad wireless connections at specific times during the day. Below you can see a screenshot from my AP at home. You can specify either 2.4 or 5Ghz channels or even view live data from the second dropdown.

 

Between 6-7PM we can see a big spike on 802.11 traffic near this AP. 

 

Share below if you've used this tool before and how it helped!

 

Screen Shot 2017-12-06 at 3.26.04 PM.png

1 REPLY 1
Highlighted
Kind of a big deal

Re: Leverage RF tool to tshoot/monitor interference

I didn't know about that one.  That is pretty good.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.