Is Cisco 8821 the ideal VoIP phones (to replace cisco 7925 phones) to use with MR46 Merakis ?

PierreRosello
Comes here often

Is Cisco 8821 the ideal VoIP phones (to replace cisco 7925 phones) to use with MR46 Merakis ?

Currently we have cisco 7925 portable phones along with Cisco Unity Connection (UC) and Unified Commmunications Manager (UCM)  (2 VMs) to manage them, they are most likely to be End of Life. We are experiencing multiple frequent downtimes while they are connected to the concerned SSID on our Meraki MR46 Setup, which we have configured following this article:

https://documentation.meraki.com/MR/Other_Topics/Compatibility_with_Cisco_7925G_VoIP_Phone

 

Is the Cisco 8821 portable phone model compatible with the setup mentionned above ?

https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/wireless-ip-phone-8821/dat...

4 REPLIES 4
DarrenOC
Kind of a big deal
Kind of a big deal

Your only viable options are the Cisco 8821’s which are on a current lead time of 133 days or possibly a soft phone ie Jabber

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Inderdeep
Kind of a big deal
Kind of a big deal

@PierreRosello : yes 8821 and 8821-EX are the replacement models !

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
BrandonS
Kind of a big deal

I would consider SIP-DECT solutions as long as you don’t mind installing some DECT radios.  In my experience, they work so much more reliably than WiFi handsets and you will have more options from Spectralink, Yealink and Konftel off the top of my head.

- Ex community all-star (⌐⊙_⊙)
cmr
Kind of a big deal
Kind of a big deal

@PierreRosello we've used 8821s for years with Meraki wireless though we have a few MR36s, we don't have any MR46s.  In general they work well though as @BrandonS say, if you have a small site without too many phones then Dect can work better.  We couldn't use it as each antenna could only support a max of 8 phones at a time and our buildings are large.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels