How to replace to cold swap MR

SOLVED
kawata2
Here to help

How to replace to cold swap MR

I am considering replacing the wireless AP with a cold standby AP by following the procedure below.
 
Is it possible to replace it using the same procedure?

 

  1. remove MR device from cloud portal.
  2. add new MR (cold standby).

 

Regards,

 

 

 

1 ACCEPTED SOLUTION
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @kawata2 , really is nothing to it. Literally just swap the physical device over with the new one.

 

Dont forget to remove the old AP from the network and unclaim it

 

https://documentation.meraki.com/zGeneral_Administration/Inventory_and_Devices/Adding_and_Removing_D...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

4 REPLIES 4
CptnCrnch
Kind of a big deal
Kind of a big deal

In a nutshell: yes. That's the beauty of Cloud based management 🙂

Thank you for your reply.

 

I was relieved that I heard that.

DarrenOC
Kind of a big deal
Kind of a big deal

Hi @kawata2 , really is nothing to it. Literally just swap the physical device over with the new one.

 

Dont forget to remove the old AP from the network and unclaim it

 

https://documentation.meraki.com/zGeneral_Administration/Inventory_and_Devices/Adding_and_Removing_D...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Thank you for your reply and your advise.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels