HP Envy 5530 e Fails connecting to AP

SOLVED
ldeffinbaugh
Conversationalist

HP Envy 5530 e Fails connecting to AP

Since moving to an all Meraki system I have been unable to connect my HP Envy 5530 wireless printer to the wireless. 

 

Previous system was an Apple Time Capsule. When switching I did have issues with Wireless sound speakers and smart bulbs. But I have sense resolved that.

 

Any suggestions?

 

MX64, MS220-8P, MR33

1 ACCEPTED SOLUTION
ldeffinbaugh
Conversationalist

Found the issue

 

I had to change 802.11 r to adaptive and it works now

View solution in original post

6 REPLIES 6
ww
Kind of a big deal
Kind of a big deal

try a ssid with wpa+wpa2, no band steering, lowest minimal bandwith.

ldeffinbaugh
Conversationalist

Tried that and no change

 

Device does show it connects to the AP but then I receive an error of connection failed.

 

changed one ssid to lower density and dual band operation (with no band steering) also included wpa+wpa2

PhilipDAth
Kind of a big deal
Kind of a big deal

See if their any are firmware updates for your printer.

firmware is the latest

ldeffinbaugh
Conversationalist

Found the issue

 

I had to change 802.11 r to adaptive and it works now

how did you do those changes?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels