cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

HP Envy 5530 e Fails connecting to AP

SOLVED
Highlighted
Conversationalist

HP Envy 5530 e Fails connecting to AP

Since moving to an all Meraki system I have been unable to connect my HP Envy 5530 wireless printer to the wireless. 

 

Previous system was an Apple Time Capsule. When switching I did have issues with Wireless sound speakers and smart bulbs. But I have sense resolved that.

 

Any suggestions?

 

MX64, MS220-8P, MR33

1 ACCEPTED SOLUTION

Accepted Solutions
Conversationalist

Re: HP Envy 5530 e Fails connecting to AP

Found the issue

 

I had to change 802.11 r to adaptive and it works now

5 REPLIES 5
Kind of a big deal ww
Kind of a big deal

Re: HP Envy 5530 e Fails connecting to AP

try a ssid with wpa+wpa2, no band steering, lowest minimal bandwith.

Conversationalist

Re: HP Envy 5530 e Fails connecting to AP

Tried that and no change

 

Device does show it connects to the AP but then I receive an error of connection failed.

 

changed one ssid to lower density and dual band operation (with no band steering) also included wpa+wpa2

Kind of a big deal

Re: HP Envy 5530 e Fails connecting to AP

See if their any are firmware updates for your printer.

Conversationalist

Re: HP Envy 5530 e Fails connecting to AP

firmware is the latest

Conversationalist

Re: HP Envy 5530 e Fails connecting to AP

Found the issue

 

I had to change 802.11 r to adaptive and it works now

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.