Does Meraki MR supports setting which Modulation Coding Scheme(MCS) value is used?

[CHGR]

I want to set MCS value as 1-7,9-15.

Does Meraki MR support to set this value?

If so, could you let me know how to do it?

[PhilipDAth]

You can configure a minimum bit rate.

https://documentation.meraki.com/MR/Radio_Settings/Minimum_Bitrate_Control

You can not specify specific MCS values.

[NolanHerring]

Even if you could (which you can't with Meraki), why would you want to if you don't mind me asking. It's usually never a good idea to do this, even on a cisco WLC.